Peacock Fuel Hand Warmers

Thermotherapy > Hand Warmers > Peacock Fuel Hand Warmers

Peacock Fuel Hand Warmers - Peacock have been making Fuel hand warmers for over 15 years, Peacock the Original Fuel Hand Warmer.

Peacock is a high quality hand warmer Made in Japan.

The Peacock fuel hand warmer will keep your hands warm in cold temperatures for up to 24 hours and can be reused with 25ml of fuel from a lighter fuel filler available in newsagents and tobacconists.

The Peacock hand warmer gets to a high temperature of 30 degrees and stays this warm for 7-8 hours for the mini and 12 hours for the standard size, 18 hours for the giant.

The Peacock fuel hand warmer works only by platinum catalysis, which causes no air pollution and it not damaging to the environment.

The newly developed platinum-catalyzed glass fibre burner offers quick and sure lighting.

The unit gives constant warmth for a full day on just one fill (2 cups=25ml) of fuel

Useable even in extreme cold -40c and produces 5 times as much heat as a disposable warmer. The unit is designed to be reusable.

Uses of the Peacock hand warmer Ideal for winter sport and outdoor work of all kinds. Especially suitable for skiers, hunters, golfers, spectators, skaters, police officers, fishermen, seamen, hikers, lumberjacks, campers or those who suffer from cold hands.
 

Peacock Hand Warmer Mini	Peacock Hand Warmer Standard	Peacock Hand Warmer Giant
Warm 7-8 hours	Warm 12 hours	Warm 18 hours
Only 22.95	Only 25.95	Only £32.95

DESCRIPTION OF USE OF THE PEACOCK HAND WARMER with Fuel In order to insure your safety and the proper use of the PEACOCK handwarmers, carefully read all the instructions below.
		Take off the perforated top cover and remove the burner by holding it lengthwise. Do not touch or pull the burner element (shown in Fig.1 in red) strongly. Dirt from fingers will damage it. Also, do not touch if warmer or burner is too hot.
		Insert the bottom of the filling cup into the mouth of the fuel tank and fill the filling cup until it reaches the line. Click here to see the capacity of each type of warmers.
		Rotate the filling cup 90º in either direction to allow the fuel to flow into the warmer.
		When all the fuel has been absorbed, remove the filling cup. Hold the warmer upside down and press lightly 2 ¯ 3 times with your fingertips to discharge the excess fuel into the cup. Replace the burner.
		To light the unit using a match or lighter, hold a flame to the burner element for between 3-5 seconds.
		Warning DO NOT light the warmer upside down when lighting, this will cause damage to the burner element.
		Replace the perforated top cover.
		Put the warmer in its velveteen bag and close it tightly using the drawstring and stopper before using the warmer.